Model 91271BM

The casting molding machine is shaking and pressing without turning the half-forms with subsequent additional pressing. It is intended for forming the upper and lower half-forms on a one-sided model plate by shaking with pre-pressing. The model range of shaking and shaking-press molding machines produced by our factory includes: casting machines, shaking-press molding machines without turning half-forms, with subsequent additional pressing for forming upper and lower half-forms.

5 000 Request a KP

About the product

Scope of application

The machine is designed for forming the upper and lower half-forms on a one-sided model plate by shaking with pre-pressing. It is widely used in many foundries in the conditions of small-scale, serial and mass production of castings.

Product design

The main part of the machine is the bed, which is also a cylinder for the press piston. The press piston, in turn, serves as a cylinder for the shaking piston. The exhaust mechanism is installed on the sole of the bed and consists of two cylinders, into which pistons are inserted, connected to each other by a rigid connection. The pins can be installed on various sizes of the flasks.

During the extraction, the vibrator mounted in the table automatically turns on and off. The traverse is rotated to the working position and back by a pneumatic cylinder. An oil barrel is mounted on the column, designed for smooth lifting of the exhaust pins. The control of the machine is push-button from the control panel. The machine is characterized by its simple and reliable design, convenient operation and maintenance.