Model 22114

The casting molding machine is shaking and pressing without turning the half-forms with subsequent additional pressing. It is intended for the manufacture of upper half-forms, and when using tilters-and lower half-forms in the molding departments of foundries of small-scale and serial production plants. The model range of shaking and shaking-press molding machines produced by our factory includes the model 22114. This model is designed for the manufacture of upper half-forms, and when using tilters-and lower half-forms in the molding departments of foundries of small-scale and serial production plants.

On request Request a KP

About the product

Scope of application

Molding departments of workshops of small-scale and serial production plants.

Product design

The main components are: a shaking-press mechanism, a traverse, a rack, pneumatic equipment, a lubrication system, a control panel.

At the same time, the press traverse is withdrawn from the working position. After installing the model support equipment on the machine table, a filling frame is installed and the flask is filled with a mixture. By pressing the "shaking" lever, the mixture is pre-compacted in the flask, after which the filling frame is removed. After shaking, the molding mixture is poured into the flask. Further technological operations are performed automatically. The operating mode lever is moved to the "automatic" position. The press traverse rotates to the working position. Shaking occurs with simultaneous pressing. After the time allotted for this operation has elapsed, the time relay gives the command to stop shaking with simultaneous pressing.
The press cylinder with the shaking table is lowered. In the lower position of the press piston, a command is given to remove the traverse to its original position, turn on the vibrators and lift the exhaust mechanism. The pins of the exhaust mechanism separate the compacted semi-mold from the model. The half-form is removed, the pins are lowered to their original position.