Sleeve model 09721 / Изготовление образцов формовочных и стержневых смесей / Приборы для лабораторий литейных цехов / Литмашприбор

Main | Catalog | Foundry sand testing equipment | Production of samples of molding and rod mixtures | Sleeve model 09721

Sleeve model 09721

Sleeve model 09721 is designed for the manufacture of cylindrical samples from wet sands of molding and core sands to determine gas permeability and compressive strength.

On request Request a KP

About the product

Components

The sleeve includes the actual sleeve and the pallet. The pallet is intended for use as the bottom of the sleeve when filling it with a mixture. The sleeve is used in shop and factory laboratories of molding materials and mixtures and in laboratories of research organizations.

Inner diameter, mm	50±0,05
Surface hardness, HRC	≥49
Roughness of the inner surface, microns	Ra≤0,4-0,8
Installed no-failure operating time, cycles	5х10^4
Dimensions
Diameter, mm	57
Height, mm	120
Sleeve weight without pallet, kg, no more	0,6
Exceeding the inner diameter of the sleeve outside the allowable value	50,05 мм

Laboratory Muller model 02113

Sand rammer model 5033A

Sleeve model 09722

Tube filler accessory model 09730

Tensile core box model 09741

Sleeve model 09721

About the product

Similar products

Request a KP for Sleeve model 09721