Laboratory Sifter model 029 The laboratory sifter model 029 is used to determine the fineness of foundry sands. Due to its design, this model allows fast and high-quality analyzes with high intensity and frequency. Laboratory Sifter model 01412 The laboratory sifter model 01412 is used to determine the fineness of foundry sands. It is used for work in land laboratories of foundries and central factory laboratories. Laboratory sieves model 026 The sieves are designed for sieving the sand base when determining the granulometric composition of the fineness module and the average grain size in the land laboratories of foundries, central factory laboratories and laboratories of research institutes Sand strength testing machines model 04116 Machine mod. 04116 is designed to determine the tensile and compressive strength of molds and cores in the dry state. Sand strength testing machines model 04116A Machine mod. 04116A is designed to determine the compressive and shear strength of molds and cores in the green state and bending in the dry state. Sand strength testing machines model 04116B Sand strength testing machines model 04116B is designed to determine the compressive strength of molds and cores in the green state. Sand strength testing machines model 04116V Machine 04116V is designed to determine the compressive tensile strength, shear of molding and core sands in the green or dry state. Laboratory Muller model 02113 Laboratory Muller model 02113 is intended for the preparation of experimental control compositions from molding and core sands with powdered, liquid and viscous additives. Sand rammer model 5033A The sand rammer model 5033A is intended for the manufacture of standard samples of mixtures in accordance with GOST 23409.6-78 when determining the physical and technological properties of molding materials and core mixtures in shop, factory laboratories, as well as in laboratories of research organizations. Sleeve model 09721 Sleeve model 09721 is designed for the manufacture of cylindrical samples from wet sands of molding and core sands to determine gas permeability and compressive strength. Sleeve model 09722 Sleeve model 09722 is designed to determine the compactibility and bulk density Tube filler accessory model 09730 Tube filler accessory Tensile core box model 09741 Tensile core box mod. 09741 is designed for the manufacture of "eights" - samples of casting cores tested in tension. Friability tester model 02212    The friability tester  model 02212 is used to determine the friability (surface integrity) of a clay bonded foundry molding sand by measuring the ability of compacted molding sand to resist abrasion or scuffing within the first few millimeters at the surface of a prepared mold. Bell type gas permeability tester model 04315 The  Bell type gas permeability tester 04315 is designed to determine the gas permeability of green sands and green, dry or cured samples of molding and core mixtures Digital absolute permmeter model 04315M The Digital absolute permmeter mod. 04315M is a fully automatic system which measures the permeability of porous sand masses, both in compacted and loose states. Attachment for determining the gas permeability model 01511M Attachment for determining the gas permeability model 01511M is designed to determine the gas permeability and specific surface area of bulk materials. Surface measurement hardness model 04412A Hardness tester for green-sand moulds, cores model 04412A is designed to measure the surface hardness of green-sand moulds and cores Digital hardness tester for green-sand moulds, cores model 04412AM Digital hardness tester for green-sand moulds, cores model 04412AM Hardness tester for dry-sand moulds and cores model 04421 Hardness tester for dry-sand moulds and cores model 04421 is designed to measure the surface hardness of dry-sand or skin-dried moulds and cores in the molding and core sections of foundries, Clay tester model 01315M Tester model 01315M is intended for the separation of the clay component, as well as for the preparation of solutions and suspensions in the laboratories of foundry molding materials, central factory laboratories and research organizations Moisture analyzer model 062M3 The Moisture analyzer model 062M3 is used to determine the moisture content of green sand and other raw materials used within the foundry