+7 (47472) 2-25-40
+7 (47472) 2-27-84
op@uzlo.org

Model 91271BM

Jolt squeeze molding machine without half-molds turning followed by final squeezing. This machine is intended for upper and lower half-molds over molding single-sided pattern plate with the use of jolting and final squeezing procedure.

Our factory offers a model range of jolt and jolt squeeze molding machines which includes: jolt squeeze molding machines without half-molds turning, with subsequent final squeezing for upper and lower half-molds manufacturing.

Field of application

This machine is intended for upper and lower half-molds over molding single-sided pattern plate with the use of jolting and final squeezing procedure. It finds wide application in foundry workshops of small-scale, serial and mass castings production.

Product design

The main component of the machine is a bed which is also a cylinder for a squeeze piston. Squeeze piston, in turn, serves as cylinder for joint piston. A drawing mechanism is mounted on the bed bottom which consists of two cylinders with pistons inside that, in turn, are connected to each other fixedly. Pins can be set onto mold boxes of different sizes.

During drawing a vibrator mounted in a table is switched on and off automatically. Traverse turning to the operational position and back is performed by pneumatic cylinder. An oil tank is mounted in the column used for smooth lifting of draw pins. The machine is manipulated with buttons of control panel. The machine`s advantages are simple and reliable construction, convenient control and maintenance system.

Technical specifications:
Mold boxes clear dimensions, mm Mold boxes height, mm 500х400х200
Load capacity, kg 200
Molding force, kN 49
Compressed air operating pressure, MPa 0.59
Overall dimensions, mm 1660х1060х1560
Weight, kg 1300
Scope of supply
The equipment is supplied with spare parts kit and operating manual.