Sand-gravel mixture process equipment

Jolt squeeze molding machine without half-molds turning followed by final squeezing. This machine is intended for upper and lower half-molds over molding single-sided pattern plate with the use of jolting and final squeezing procedure.

Jolt squeeze molding machine without half-molds turning followed by final squeezing. This machine is intended for clay bonded molds manufacturing with 500x400 mm mold boxes in foundry workshops of serial production.

Jolt squeeze molding machines without half-molds turning with subsequent final squeezing. This machine is intended for manufacturing upper half-molds, and lower half-molds when using the canting device, in molding sections of foundry workshops of small-scale and serial production.

Jolt squeeze molding machines without half-molds turning with subsequent final squeezing. This machine is intended for manufacturing upper half-molds, and lower half-molds when using the canting device, in molding sections of foundry workshops of small-scale and serial production.

Jolt squeeze molding machines without half-molds turning with subsequent final squeezing. This machine is intended for manufacturing upper half-molds, and lower half-molds when using the canting device, in molding sections of foundry workshops of small-scale and serial production.

Core blowing machine. This semiautomated machine is intended for sand cores formation by tensile сore box filling with molding sand and its squeezing by compressed air.

The manned shot blasting chamber KDO-15 is a high-performance device intended for shot peening under high pressure and speed onto the surfaces of castings, forgings, rolled products, welding structures and parts after heat treating, for the purpose of removing molding sand remnants, traces of corrosion, pollution and oxidation.

Shotblasting machine. This machine is intended for shot blasting of castings, forgings, rolled products, welds, heat treated parts, glass, stone and other materials.

This aggregate is intended for cleaning small and middle-size castings in foundry workshops of serial and small-scale production. The aggregate can also be used for cleaning forgings, stampings and other workpieces.

This aggregate is intended for cleaning small and middle-size castings in foundry workshops of serial and small-scale production. The aggregate can also be used for cleaning forgings, stampings and other workpieces.

Batch Sand Mixers B1110 B1110 is intended for molding sand preparation using the sand-gravel mixture process. This sand mixer operating principle is based on transverse rollers moving over the mixture layer and mixing it with rotating ploughs. A sand mixer of this type provides formation of a homogeneous mixture without clumps. The mixing cycle is 5-10 minutes.