+7 (47472) 2-25-40
+7 (47472) 2-27-84
op@uzlo.org

Model 04116V

The machine is intended for testing the strength and tensile limit of molding and core sand mixtures in a dry or hardened condition in compliance with GOST 23409.7-78.

The unit is multi-purpose due to its capabilities. The unit can be used in a wide range of generated forces due to the presence of a 3 stepped force actuator.

Main components:

  • Compressor
  • Force actuator
  • Signal conditioner
  • Valve block
  • Tested samples fixation device
PDFBrochure
Technical specifications:
Indicated values report Digital, three-digit indicator
Generated forces range, N (kilogram-force) 1st stage: to 1177 (120)
2nd stage: to 3433 (350)
3rd stage: to 9810 (1000)
Measurement range for compression testing, MPa 0.006-5.0
Measurement range for tensile testing, MPa 0.06-5.0
Measurement range for bending testing, MPa 1.4-60
Measurement range for shearing testing, MPa 0.006-4
Load build-up time in samples during compression and tensile testing, sec 20-80
Relative error in a measurement range MPa, % ±2
Magnitude of indicators in the measurement range, % 4
Capacity, measurements/hour up to 50
Overall dimensions, mm 350х352х500