+7 (47472) 2-25-40
+7 (47472) 2-27-84
op@uzlo.org

Model 04116А

The machine is intended for testing the strength limit upon compression and shear of molding and core sand mixtures in a wet condition and bending in a dry and hardened condition in compliance with GOST 23409.7-78.

The unit is used in workshops, central factory laboratories and research laboratories of enterprises. NF and T climatic category, placement category 4 according to GOST 15150 -69. It is intended for operating in laboratory-type rooms at a temperature of 10-35.о.

  • Compressor
  • Force actuator
  • Signal conditioner
  • Valve block
  • Tested samples fixation device
PDFBrochure
Technical specifications:
Measurement range for testing: compression, MPa 0.06-0.30 bending, MPa 1.4-7.0
Forces generated by the unit in a measurement range, N: compression 117.7-588.6 bending 97.22-486.1
Load build-up time, sec 20-50
Relative error in a measurement range, % ±2
Relative value of indicators in the measurement range, % 4
Overall dimensions, mm
Length 400
Width 290
Height 360
Weight, kg 30