Model 09721
Warning: Use of undefined constant medium - assumed 'medium' (this will throw an Error in a future version of PHP) in /home/uzloorg/uzlo.ru/docs/wp-content/themes/yoo_nano3_wp/warp/systems/wordpress/layouts/page.php on line 16

Components
A specimen tube consists of the actual tube and a mold base. A mold base is used as a specimen tube bottom when it is filled with mixture. The specimen tube is applied in molding materials workshops and factory laboratories and research institutions laboratories.

Internal diameter, mm | 50±0.025 |
---|---|
Surface hardness, HRC | ≥49 |
Internal surface roughness, μm | Ra≤0.4 |
Specified no-failure operating time, cycles | 5х104 |
Specimen tube dimensions: | |
Diameter, mm | 57.9 |
Specimen tube height, mm | 120-0.35 |
Specimen tube weight without a mold base, max. kg | 0.6 |
Value out of range of the permissible limit values for specimen tube inner diameter | 50.025 mm |
---|