+7 (47472) 2-25-40
+7 (47472) 2-27-84
op@uzlo.org

FK2 molding complex

This complex is intended for cold binder-bonded mixtures preparation during molds and cores production with possibility of using ALPHASET, PEP SET, CO2, COLD-BOX Resol+CO2 and FURAN processes.
Its capacity is 1 to 2 tons of molding sand per hour. It is can be applied for cold binder-bonded mixtures™ preparation during molds and cores production. Molding complex FK2 advantage is the absence of commissioning works necessity.

Litmashpribor LLC offers FK2 molding complex with a capacity of 1 to 2 tons of molding sand per hour.
This complex can be applied during molds and cores production with possibility of using ALPHASET, PEP SET, CO2, COLD-BOX Resol+CO2 and FURAN processes.

Advantages:

Compactness, absence of commissioning works necessity.

Configuration:

  • Sand mixer model S-102.
  • Metering device for one product with three programs setting possibility.
  • Storage tank.
  • Support frame.
  • Molder control panel with the following functions: program selection, mode selection start/stop/pause.
  • Control cabinet equipped with Mitsubishi pls and frequency converters, touch screen, air-preparation unit, filter for sand purification by binder and solidifying agent, pneumatic locking ball valve, reed sensor preventing sand mixer power-up in case of opened screw.
  • CAMOZZI pneumatics.
  • Two metering pumps operating with magnet drives (made of stainless steel and Teflon gear wheels).
    Including:
    1 binder pump (Fluid-о-tech Italy)
    1 activator pump (Fluid-o-tech Italy)
  • Two tank level sensors (upper/lower).
  • Operation manual.
PDFBrochure
Technical specifications:
Maximum mixer capacity, ton/h 1-2
Screw rotation speed, rpm 500
Mixer power consumption, kW 5
Air consumption per cycle, not over, m3 0.008
Compressed air operating pressure, MPa 0.59
Storage tank capacity, m3 0.7
Complex weight, kg 935
Complex overall dimensions, mm 1670х1240х1900