+7 (47472) 2-25-40
+7 (47472) 2-27-84
op@uzlo.org

Model FRTsP1

Cyclone type sleeve filters with a pulse regeneration system are designed to purify air from industrial emissions of dust and aerosols. This type of filter has proven to be effective in removing dust and exhausting excess pressure in tanks that comes from the operation of the pneumatic sand conveyor complex.

The filter has 2 purification stages:

  • The cyclone inlet separates up to 80% of dust and abrasive particles.
  • Filtration sleeves that purify the air to a residual concentration of 2 ÷ 20 mg/m³.

The filter has a built-in mechanism for regeneration (purification) of filtration sleeves by pulse blowing with compressed air. Pulse blowing control is carried out in automatic mode by a digital programmable controller with an LCD display, which allows quick and flexible adjustment of the sleeves regeneration parameters.
The arrangement of sleeves in a cellular shape in the filter housing allows them to be placed more tightly to obtain greater capacity with smaller dimensions.
The compressed air impulse is provided by imported solenoid valves with a long service life: at least 10⁵ actuations.
Dusty air inside the filter moves from top to bottom, which reduces the dust load on the filter cloth, reduces the risk of dust sticking to the sleeves and facilitates their regeneration.

PDFBrochure
Technical specifications:
Capacity, m3/h up to 3000
Filtering surface area, m2 10.2
Sleeve diameter/length, mm 135 / 2000
Dimensions (L/W/H), mm 1518/1376/4080
Weight, t 0.45